CONFIG PRINTBIN/de

From MCS Wiki AVR
Jump to: navigation, search

Contents

= (**COPIED FROM ENGLISH PAGE**) === Action

Configure PRINTBIN behavior

 

 

Syntax

CONFIG PRINTBIN = extended

 

 

Remarks

extended

This mode is the only mode. It allows to send huge arrays(more then 255 elements) to the serial port. Without the CONFIG PRINTBIN option, the maximum number of elements is 255. Because support for big arrays requires more code, it is made optional.

 

 

See also

CONFIG PRINT

 

 

Example


$regfile = "m103def.dat" ' specify the used micro
$crystal = 8000000 ' used crystal frequency
$baud = 19200 ' use baud rate
$hwstack = 32 ' default use 32 for the hardware stack
$swstack = 10 ' default use 10 for the SW stack
$framesize = 40 ' default use 40 for the frame space
 
Config Com1 = Dummy , Synchrone = 0 , Parity = None , Stopbits = 1 , Databits = 8 , Clockpol = 0
 
Config Printbin = Extended
Dim A(1000)
Printbin A(1) ; 1000

Languages   English Deutsch  
Personal tools
Namespaces
Variants
Actions
Navigation
In other languages
Language