BitmapHandle
From MCS Wiki AVR
Contents |
Action
Specify the Bitmap Handle
Syntax
BitmapHandle handle
Remarks
|
handle |
Bitmap Handle. The initial value is 0. Valid range values 0 to 31. |
Handles 16 to 31 are defined by the FT800 for built-in font.
Handle 15 is defined in the co-processor engine commands CmdGradient, CmdButton, and CmdKeys.
Users can define new bitmaps using handles from 0 to 14.
If there is no co-processor engine command CmdGradient, CmdButton and CmdKeys in the current display list, users
can even define a bitmap using handle 15.
Graphics Context
The value of handle is part of the graphics context, as described in section 4.1 in FT800 Series Programmer Guide.PDF from FTDI.
See also
| Languages | English |
|---|