CMDFTSTACK

Action

This FT800 command will send data from the soft stack to the FT800 processor.

 

 

Syntax

CMDFTSTACK bts [,opt]

 

 

Remarks

bts

The number of bytes to pop from the stack.

opt

An optional parameter to change stack clean up. When no parameter or 0 is specified, the soft stack will be cleaned up. But when a string is passed you can not clean up the stack since the pointers would point to the wrong address. In such a case specify a numeric value like 2 so the compiler will not clean up the stack. You must clean up the stack before the code returns. You can do this with the ADIW asm command. Please make sure you adjust with the same amount of bytes as you passed.

 

 

See also

 , CMD32

 

 

Example

'------------------------------------------------------------------------------------------------------------
Sub Cmdbutton(bystack X As Integer , Bystack Y As Integer , Bystack W As Integer , Bystack H As Integer , Bystack Fontx As Integer , Bystack Options As Word , Byval S As String)
'------------------------------------------------------------------------------------------------------------
 ' Draws Keyboard like buttons
 
 ' Options Are
 ' OPT_3D = 0
 ' OPT_FLAT
 
 If Asc(S) = 0 Or Asc(S) > 127 then Exit Sub
 
 Cmd32 Cmd_button
 cmdftstack 12,2 'pop and transmit 12 bytes, option 2 means, no stack clean up
 Cmdstr S 'because we access this string we could not clean up 
! adiw yl,12 ; manual clean up stack
End Sub

Languages	English