CmdDlStart
From MCS Wiki AVR
(Difference between revisions)
Admin (Talk | contribs)
(Created page with "= <span class="f_Header">Action</span> = Start a New Display List. When the co-processor engine executes this command, it waits until the display list is ready for writing, ...")
(Created page with "= <span class="f_Header">Action</span> = Start a New Display List. When the co-processor engine executes this command, it waits until the display list is ready for writing, ...")
Latest revision as of 18:11, 12 December 2014
Action
Start a New Display List.
When the co-processor engine executes this command, it waits until the display list is ready for writing, then sets Reg_Cmd_DL to zero.
Syntax
CmdDlStart
Remarks
In most of FTDI's FT800 C/C++ examples you will notice this command is used at the beginning of each loop or graphic routine.
Note: The Bascom FT800 Lib calls CmdDlStart from within UpdateScreen so it's not required in most circumstances.
| Languages | English |
|---|