View source

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

- tiny461 and tiny861 only did set pcie0 when you enable the PCINT because there is just one interrupt in the chip. In 2080, both PCIE0 and PCIE1 are enabled/disabled. - added m48PB, m88PB, 168PB and m328PB dat files. - new Rainbow functions : [[RB COLOR|RB_Color]] and [[RB COPY|RB_Copy]] added by Galahat - simulator did not show maximum values of DWORD correct. - [[RB GETCOLOR]] and [[RB LOOKUPCOLOR]] functions did return false result when index was a variable. - some font problems solved. - simulator could crash for xmega processors. - when using non-mono font like Arial, text selection does not work properly. Use a font like CONSOLAS. - Added option 'Use Monofont' for backwards compatibility - Some new atmel PDF files could not be loaded with the PDF viewer. Viewer is rewritten and requires a new DLL named BASPDF.DLL - [[GETADC|getadc]]() on m640.m1280/m2560 or any other processor with 6 mux bits did not set mux5 bit for getadc(32) and higher. - generic byte [[COMPARE|compare]]() function added, based on code and idea from MWS. (Magic White Smoke) - varexist() did not support ALIAS. - XMega64A1-SRAM 4-Port-Sample.bas sample added for setup EBI 4 port on XMega. See also [http://avrhelp.mcselec.com/adding_sram_4_port_non_multipl.htm Adding XRAM to XMEGA using EBI] - when bascom-avr.xml options file exists in the bascom application folder, that option file will be used. - [[FORMAT|format]] is extended to use a variable for the mask. - [[CONFIG XPIN|config xpin]] did not support alias for the pin. - [[BUFSPACE|bufspace]]() did not support UART 5-8 - [[INSERTCHAR]] and [[DELCHAR]] use Z pointer which must be cleared for XMEGA. fixed in mcs.lib - programmer did not fetch correct chip from editor when code was not saved. this would give a chip mismatch. - assigning a negative value to a dword did not throw an error. - [[View Code Explorer|code explorer]] can show estimated stack usage. - higher standard baud rates added to terminal emulator - added support for EDMA in xmega8/16/32 E5. See [[CONFIG EDMA|config EDMA]] - [[VERSION|version]]() function did not append to string but would overwrite existing string data. - [[RIGHT|right]]() adds an additional null byte when a numeric constant is used for the number of characters to copy. - new [[DIM|dim]] option to specify multiple items : dim a,b,c,d as byte failed when using multiple indexed items. - all dat files updated with CONFIG information. - printing values from multi index variables failed : print index(index1,index2) -  m1284pdef.dat updated with missing TIFR3 register. - more fonts in various sizes from Adam Siwek. - [[POWER|power()]] function for doubles did not work correct when assigned to a function - some new atmel PDF files can not be loaded with the PDF viewer. Viewer is rewritten. - SSD1306 i2c oled driver updated for Xmega. - m649A and m649P dat files added. - [[LCDFONT]] prm, added. prm selects the font table (0-3) of a text LCD. - [[CONFIG POWER REDUCTION|CONFIG POWER_REDUCTION]] set register to 0 in some conditions. Also added LCD and other new Xmega power reduction options. - CONFIG OSC extended with calibration register settings and DFLL. - val() for doubles has a bug for XMega >64KB chips - added [[FLIP|flip]](byte) function to mirror bits in a byte - xmega128B3 dat file added - [[READSIG|readsig]] also works for normal AVR processors. - inputbin and printbin load 1 element too many with arrays using base 0. - [[CONFIG INPUT|config inputbin]] added to allow reading packets of up to 64 KB - added support for LCD text OLED RS0010 lcd4_anypin_oled_RS0010.lib - [[Getting Started - FT800|FT81x]] support added - M324PB dat file added. - [[I2CINIT]] enhanced for multiple TWI - [[I2C TWI-MULTI.lib]] added to support multiple TWI busses. - second SPI on m328PB added : [http://avrhelp.mcselec.com/spi1init_spi1in_spi1out_spi1mo.htm INIT1SPI], SPI1OUT, SPI1MOVE, SPI1IN -  user donated library [[LCD DOGS104A I2C|I2C DOGS104]] driver, SSD1803A included. - [[URL2IP]](url) function added to W5100 to do DNS lookup using google DNS server - when defining a const [[WRITEEEPROM|Updateeprom]] , the eeprom will be updated. which means that the value will only be written when it differs - [[BASE64ENC]] and [[BASE64DEC]] can work on byte arrays too.   2017, 2080 release - [[SGN]] extended to byte, integer, word, dword and long

Return to What is new.