KamProg for AVR/de
From MCS Wiki AVR
== (**COPIED FROM ENGLISH PAGE**) ==KamProg for AVR is an USB programmer from Kamami.
You need to install the software that comes with the KamProg.
KamProg can be used with BASCOM but also with AVR Studio.
BASCOM will use the KamProg software to either automatic or manual program the chip.
The Kamprog programmer works on Vista32 and Vista64 and requires no special drivers.
The KamProg programmer is available from MCS Electronics webshop.
All new Mega processors are supported. Support for other processor is on going. The screen above is from the first release and outdated but gives a good impression about the interface.
| Languages | English • Deutsch |
|---|