INT

Action

Returns the integer part of a single or double.

 

 

Syntax

var = INT( source )

 

 

Remarks

Var	A numeric floating variable that is assigned with the integer of variable source.
Source	The source variable to get the integer of.

 

The fraction is the right side after the decimal point of a single.

The integer is the left side before the decimal point.

 

1234.567 1234 is the integer part, .567 is the fraction

 

 The assigned variable must be a single or double. When you want to convert a floating point data type to an integer data type, just assign the variable to a variable of that type :  someLong = someDouble

See Also

FRAC , FIX , ROUND

 

 

Example

'-----------------------------------------------------------------------------------------
'name : round_fix_int.bas
'copyright : (c) 1995-2005, MCS Electronics
'purpose : demo : ROUND,FIX
'micro : Mega48
'suited for demo : yes
'commercial addon needed : no
'-----------------------------------------------------------------------------------------
 
$regfile = "m48def.dat" ' specify the used micro
$crystal = 4000000 ' used crystal frequency
$baud = 19200 ' use baud rate
$hwstack = 32 ' default use 32 for the hardware stack
$swstack = 10 ' default use 10 for the SW stack
$framesize = 40 ' default use 40 for the frame space
 
Dim S As Single , Z As Single
For S = -10 To 10 Step 0.5
Print S ; Spc(3) ; Round(s) ; Spc(3) ; Fix(s) ; Spc(3) ; Int(s)
Next
End

Languages	English • Deutsch