DriveInit/de
From MCS Wiki AVR
Contents |
= (**COPIED FROM ENGLISH PAGE**) === Action
Sets the AVR-Hardware (PORTs, PINs) attached to the Drive and resets the Drive.
Syntax
bErrorCode = DRIVEINIT()
Remarks
|
BErrorCode |
A Byte Variable, which is assigned with the error code of the function |
Set the Ports and Pins attaching the Drive for Input/Output and give initial values to the output-pins. After that the Drive is reset. Which action is done in this function depends of the drive and its kind of connection to the AVR. The functions returns 0 if no error occurred. For Error code see section Error codes.
See also
DriveCheck , DriveReset , DriveGetIdentity , DriveWriteSector , DriveReadSector , AVR-DOS File System
ASM
|
Calls |
_DriveInit |
|
|
Input |
none |
|
|
Output |
r25: Errorcode |
C-Flag: Set on Error |
Partial Example
Dim bError as Byte bError = DriveInit()
| Languages | English • Deutsch |
|---|