Getting started with Arduino and WIZ820io

From MCS Wiki
Revision as of 14:19, 17 February 2013 by MAK3 (Talk | contribs)
Jump to: navigation, search

Used Hardware:

To get started an Arduino Duemilanove board is used with an Arduino prototyping shield and prototyping jump wires.

To get the 3.3V for the WIZ820io power supply an voltage regulator is needed to transform the 5V from the Arduino board to 3.3V.

(The maximum current draw from FTDI chip on the Arduino Duemilanove is max. 50mA and therefore not usable to power the WIZ820io)


Used Bootloader:

Personal tools
Namespaces
Variants
Actions
Navigation
Language