CONFIG EVENT SYSTEM - Revision history

Admin at 20:27, 7 February 2013

2013-02-07T20:27:39Z

Admin at 20:27, 7 February 2013

2013-02-07T20:27:09Z

Admin at 20:26, 7 February 2013

2013-02-07T20:26:34Z

Admin at 20:25, 7 February 2013

2013-02-07T20:25:48Z

Admin: Created page with "= Action = This statement configures the Xmega event routing.
2013-02-07T20:25:29Z

Created page with "= Action = This statement configures the Xmega event routing. Action =

This statement configures the Xmega event routing.

 

 

= Syntax =

CONFIG EVENT_SYSTEM = dummy, MUXx=MUX, QDx=QD, QDIx=QDI, QDIRMx=QDIRM,DIGFLTx=DIGFLT

The letter X is used to indicate that a value between 0 and 7 can be used. So there is MUX0, MUX1, MUX2,MUX3 etc.

 

 

= Remarks =

The Event System is a set of features for inter peripheral communication. It enables the possibility

for a change of state in one peripheral to automatically trigger actions in other peripherals.

The change of state in a peripheral that will trigger actions in other peripherals is configurable in

software. It is a simple, but powerful system as it allows for autonomous control of peripherals

without any use of interrupt, CPU or DMA resources.

 

There are 8 multiplexers and 8 control registers. Register 0, 2 and 4 can be used for quadrature decoding.

 

 
<div style="padding: 0px; margin: 0px 0px 0px 4px;">
{| width="604" cellspacing="0" cellpadding="1" border="1" style="border: 2px solid rgb(0, 0, 0); border-spacing: 0px; border-collapse: collapse;"
|- style="vertical-align: top;"
| valign="top" width="16%" style="width: 47px; border: 1px solid rgb(0, 0, 0);" |
MUX

| valign="top" width="100%" style="width: 962px; border: 1px solid rgb(0, 0, 0);" |
There are 8 multiplexers, named MUX0-MUX7. The MUX is used to select an event source.There are many sources for events :

NONE : disabled, default

RTC_OVF : Real Timer overflow

RTC_CMP : Real Timer compare match

ACA_CH0 : analog comparator ACA, channel 0

ACA_CH1 : analog comparator ACA, channel 1

ACA_WIN : analog comparator ACA, window

ACB_CH0 : analog comparator ACB, channel 0

ACB_CH1 : analog comparator ACB, channel 1

ACB_WIN : analog comparator ACB, window

ADCA_CH0- ADCA_CH3 : ADCA channel 0-3

ADCB_CH0- ADCB_CH3 : ADCB channel 0-3

PORTA.0 - PORTA.7 : PORT A pin 0-7

PORTB.0 - PORTB.7 : PORT B pin 0-7

PORTC.0 - PORTC.7 : PORT C pin 0-7

PORTD.0 - PORTD.7 : PORT D pin 0-7

PORTE.0 - PORTE.7 : PORT E pin 0-7

PORTF.0 - PORTF.7 : PORT F pin 0-7

PRESCALER1, PRESCALER2, PRESCALER4, PRESCALER8, PRESCALER16, PRESCALER32, PRESCALER64,PRESCALER128,PRESCALER256,PRESCALER512,PRESCALER1024,PRESCALER2048,PRESCALER4096,PRESCALER8192,PRESCALER16384 : The clock divided by 1,2,4,8,16,32,64,128,256 etc.

 

TCC0_OVF  : Timer TC0 overflow

TCC0_ERR : Timer TC0 error

TCC0_CCA : Timer TC0 capture or compare match A

TCC0_CCB : Timer TC0 capture or compare match B

TCC0_CCC : Timer TC0 capture or compare match C

TCC0_CCD : Timer TC0 capture or compare match D

TCC1_OVF  : Timer TC1 overflow

TCC1_ERR : Timer TC1 error

TCC1_CCA : Timer TC1 capture or compare match A

TCC1_CCB : Timer TC1 capture or compare match B

TCC1_CCC : Timer TC1 capture or compare match C

TCC1_CCD : Timer TC1 capture or compare match D

 

Dito for TCD0, TCD1, TCE0, TCE1, TCF0 and TCF1

 

|- style="vertical-align: top;"
| valign="top" width="16%" style="width: 47px; border: 1px solid rgb(0, 0, 0);" |
QD

| valign="top" width="100%" style="width: 962px; border: 1px solid rgb(0, 0, 0);" |
Enables or disables the quadrature decoder. Will only work on QD0,QD2 and QD4.

|- style="vertical-align: top;"
| valign="top" width="16%" style="width: 47px; border: 1px solid rgb(0, 0, 0);" |
QDI

| valign="top" width="100%" style="width: 962px; border: 1px solid rgb(0, 0, 0);" |
Enables or disables the quadrature decode index. Will only work on QDI0, QDI2 and QDI4.

|- style="vertical-align: top;"
| valign="top" width="16%" style="width: 47px; border: 1px solid rgb(0, 0, 0);" |
QDIRM

| valign="top" width="100%" style="width: 962px; border: 1px solid rgb(0, 0, 0);" |
Quadrature decode index recognition mode. This is a numeric constant between 0 and 3. Each value represents the 2 possible bit values for the two input signals. Will only work on QDIRM0, QDIRM2 and QDIRM4.

|- style="vertical-align: top;"
| valign="top" width="16%" style="width: 47px; border: 1px solid rgb(0, 0, 0);" |
DIGFLT

| valign="top" width="100%" style="width: 962px; border: 1px solid rgb(0, 0, 0);" |
Defines the length of digital filtering used. Events will be passed through to the event channel only when the event source has been active and sampled with the same level for a number of peripheral clock for the number of cycles as defined by DIGFLT.

The number of samples is in the range from 1-8. The default is 1 sample.

|- style="vertical-align: top;"
| valign="top" width="16%" style="width: 47px; border: 1px solid rgb(0, 0, 0);" |
 

| valign="top" width="100%" style="width: 962px; border: 1px solid rgb(0, 0, 0);" |
 

|}
</div>
 

 

= See also =

[[ATXMEGA]]

 

 

= Example 1 =



Example 2





Example 3

← Older revision		Revision as of 20:27, 7 February 2013
Line 188:		Line 188:

	= <span style="font-size: 19px; font-weight: bold;">Example 3</span> =		= <span style="font-size: 19px; font-weight: bold;">Example 3</span> =
		+
		+	<br/><source lang="bascomavr">
		+	' Using the Counter/Timer to count events like a falling edge on Pine.5
		+
		+
		+	$regfile = "xm256a3bdef.dat"
		+	$crystal = 32000000 '32MHz
		+	$hwstack = 64
		+	$swstack = 40
		+	$framesize = 40
		+
		+	Config Osc = Disabled , 32mhzosc = Enabled '32MHz
		+
		+	'configure the systemclock
		+	Config Sysclock = 32mhz , Prescalea = 1 , Prescalebc = 1_1
		+
		+
		+	Config Com7 = 57600 , Mode = Asynchroneous , Parity = None , Stopbits = 1 , Databits = 8 'Portf.2 and Portf.3 is COM7
		+	Open "COM7:" For Binary As #1
		+
		+	'Config Interrupts
		+	Config Priority = Static , Vector = Application , Lo = Enabled , Med = Enabled 'Enable Lo Level Interrupts
		+
		+	Dim Timer_overflow As Bit
		+
		+	Print #1 , "---Event Counting with Timer C0 over Event Channel 0 from PINE.5----"
		+
		+	Config Porte.5 = Input
		+	Config Xpin = Porte.5 , Outpull = Pullup , Sense = Falling 'enable Pullup and reaction on falling edge
		+
		+
		+	Config Event_system = Dummy , Mux0 = Porte.5 , Digflt0 = 8 'Eventchannel 0 = PINE.5, enable digital filtering
		+	Config Tcc0 = Normal , Prescale = E0 , Event_source = E0 , Event_action = Capture ' Normal = no waveform generation, Event Source = Event Channel 0
		+
		+
		+	On Tcc0_ovf Timerd0_int
		+	Enable Tcc0_ovf , Lo 'Enable overflow interrupt in LOW Priority
		+	Tcc0_per = 5 'Interrupt when Count > 5
		+	Enable Interrupts
		+
		+
		+	'################MAINLOOP#######################################################
		+	Do
		+
		+	Wait 1
		+	Print #1 , "TCC0_CNT = " ; Tcc0_cnt 'Actual Count
		+
		+	If Timer_overflow = 1 Then
		+	Reset Timer_overflow
		+	Print #1 , "TCC0_OVERVLOW" 'Print it when Overflow Interrupt is fired
		+	End If
		+
		+	Loop
		+	'################MAINLOOP#######################################################
		+
		+
		+	End
		+
		+	Timerd0_int:
		+	Set Timer_overflow
		+	Return
		+	</source><br/>{{Languages}}
		+
		+	[[Category:BASCOM Language Reference]]

@@ Line 182: / Line 182: @@
 = <span style="font-size: 19px; font-weight: bold;">Example 2</span> =
+<br/><source lang="bascomavr">
+'Event Channel 7 is input for the Timer/Counter TcD1 overflow
+Config Event_system = Dummy , Mux7 = Tcd1_ovf
 = <span style="font-size: 19px; font-weight: bold;">Example 3</span> =

@@ Line 166: / Line 166: @@
 = <span class="f_Header">Example 1</span> =
+<br/><source lang="bascomavr">
 = <span style="font-size: 19px; font-weight: bold;">Example 2</span> =

@@ Line 166: / Line 166: @@
 = <span class="f_Header">Example 1</span> =
-<span style="font-size: 19px; font-weight: bold;"></span>
+= <span style="font-size: 19px; font-weight: bold;">Example 2</span> =
-<span style="font-size: 19px; font-weight: bold;"></span><span style="font-size: 19px; font-weight: bold;">Example 3</span>