Admin: 1 revision

2013-02-15T19:05:55Z

1 revision

Admin: Created page with "The Watchdog Timer The Watchdog Timer is clocked from a separate on-chip oscillator which runs ..."

2013-02-13T12:18:18Z

Created page with "The Watchdog Timer The Watchdog Timer is clocked from a separate on-chip oscillator which runs ..."

New page

== (**COPIED FROM ENGLISH PAGE**) ==The Watchdog Timer

 

The Watchdog Timer is clocked from a separate on-chip oscillator which runs at approximately 1MHz. This is the typical value at VCC = 5V.

 

By controlling the Watchdog Timer pre-scaler, the Watchdog reset interval can be adjusted from 16K to 2,048K cycles (nominally 16 - 2048 ms). The BASCOM RESET WATCHDOG - instruction resets the Watchdog Timer.

 

Eight different clock cycle periods can be selected to determine the reset period.

 

If the reset period expires without another Watchdog reset, the AT90Sxxxx resets and program  execution starts at the reset vector address.

{{Languages}}

[[Category:BASCOM_HARDWARE/de]]

AVR Internal Hardware Watchdog timer/de - Revision history

Admin: 1 revision

Admin: Created page with "The Watchdog Timer The Watchdog Timer is clocked from a separate on-chip oscillator which runs ..."