SOCKETSTAT/de

= (**COPIED FROM ENGLISH PAGE**) === Action

Returns information about a socket.

 

 

Syntax

Result = SOCKETSTAT( socket , mode)

 

 

Remarks

Result	A word variable that is assigned with the result.
Socket	The socket number you want to get information of in the range from 0-3. Or 0-7 for W5200/W5300)
Mode	A parameter which specifies what kind of information you want to retrieve.   SEL_CONTROL or 0 : returns the status register value   SEL_SEND or 1 : returns the number of bytes that might be placed into the transmission buffer. Or in other words : the free transmission buffer space.   SEL_RECV or 2 : returns the number of bytes that are stored in the reception buffer. Or in other words : the number of bytes received.

 

The SocketStat function contains actual 3 functions. One to get the status of the connection, one to determine how many bytes you might write to the socket, and one to determine how many bytes you can read from the buffer.

 

When you specify mode 0, one of the following byte values will be returned:

 

W3100A

Value	State	Description
0	SOCK_CLOSED	Connection closed
1	SOCK_ARP	Standing by for reply after transmitting ARP request
2	SOCK_LISTEN	Standing by for connection setup to the client when acting in passive mode
3	SOCK_SYNSENT	Standing by for SYN,ACK after transmitting SYN for connecting setup when acting in active mode
4	SOCK_SYNSENT_ACK	Connection setup is complete after SYN,ACK is received and ACK is transmitted in active mode
5	SOCK_SYNRECV	SYN,ACK is being transmitted after receiving SYN from the client in listen state, passive mode
6	SOCK_ESTABLISHED	Connection setup is complete in active, passive mode
7	SOCK_CLOSE_WAIT	Connection being terminated
8	SOCK_LAST_ACK	Connection being terminated
9	SOCK_FIN_WAIT1	Connection being terminated
10	SOCK_FIN_WAIT2	Connection being terminated
11	SOCK_CLOSING	Connection being terminated
12	SOCK_TIME_WAIT	Connection being terminated
13	SOCK_RESET	Connection being terminated after receiving reset packet from peer.
14	SOCK_INIT	Socket initializing
15	SOCK_UDP	Applicable channel is initialized in UDP mode.
16	SOCK_RAW	Applicable channel is initialized in IP layer RAW mode
17	SOCK_UDP_ARP	Standing by for reply after transmitting ARP request packet to the destination for UDP transmission
18	SOCK_UDP_DATA	Data transmission in progress in UDP RAW mode
19	SOCK_RAW_INIT	W3100A initialized in MAC layer RAW mode

 

W5100,W5200,W5300

Value	State	Description
0	SOCK_CLOSED	Connection closed
&H11	SOCK_ARP	Standing by for reply after transmitting ARP request
&H14	SOCK_LISTEN	Standing by for connection setup to the client when acting in passive mode
&H15	SOCK_SYNSENT	Standing by for SYN,ACK after transmitting SYN for connecting setup when acting in active mode
&H16	SOCK_SYNRECV	SYN,ACK is being transmitted after receiving SYN from the client in listen state, passive mode
&H17	SOCK_ESTABLISHED	Connection setup is complete in active, passive mode
&H1C	SOCK_CLOSE_WAIT	Connection being terminated
&H1D	SOCK_LAST_ACK	Connection being terminated
&H18	SOCK_FIN_WAIT	Connection being terminated
&H1A	SOCK_CLOSING	Connection being terminated
&H1B	SOCK_TIME_WAIT	Connection being terminated
&H13	SOCK_INIT	Socket initializing
&H22	SOCK_UDP	Applicable channel is initialized in UDP mode.
&H32	SOCK_RAW	Applicable channel is initialized in IP layer RAW mode
&H42	SOCK_MACRAW	Applicable channel is initialized in MAC layer RAW mode
&H5F	SOCK_PPOE	Applicable channel is initialized in PPOE mode

 

 

The SocketStat function is also used internal by the library.

 

For the W5300, if you use ALIGN=2, you need to take in mind that you must read the data buffer if it contains data. Do not call SocketStat again since it will read another 2 bytes to determine the received data size.

 

 

See also

CONFIG TCPIP, GETSOCKET , SOCKETCONNECT, TCPWRITE, TCPWRITESTR, TCPREAD, SOCKETCLOSE , SOCKETLISTEN,SOCKETDISCONNECT

 

 

Partial Example

Tempw = Socketstat(i , 0)' get status
Select Case Tempw
Case Sock_established
Case Else
End Select

Languages	English • Deutsch