$SERIALOUTPUT/de

= (**COPIED FROM ENGLISH PAGE**) === Action

Specifies that serial output must be redirected.

 

 

Syntax

$SERIALOUTPUT = label

 

 

Remarks

Label

The name of the assembler routine that must be called when a character is send to the serial buffer (UDR).   The character is placed into R24.

 

With the redirection of the PRINT and other serial output related commands, you can use your own routines.

This way you can use other devices as output devices.

 

See also

$SERIALINPUT , $SERIALINPUT2LCD , $SERIALINPUT1 , $SERIALOUTPUT1

 

 

Example

$regfile = "m48def.dat"
$crystal = 4000000
$baud = 19200
Config Com1 = Dummy , Synchrone = 0 , Parity = None , Stopbits = 1 , Databits = 8 , Clockpol = 0
 
$serialoutput = Myoutput
'your program goes here
Do
Print "Hello"
Loop
End
 
myoutput:
'perform the needed actions here
'the data arrives in R24
'just set the output to PORTB
!outportb,r24
ret

Languages	English • Deutsch