Options Compiler Output/de

Aus MCS Wiki AVR

Wechseln zu: Navigation, Suche

== (**COPIED FROM ENGLISH PAGE**) ==

Options Compiler Output

Item	Description
Binary file	Select to generate a binary file. (xxx.bin)
Debug file	Select to generate a debug file (xxx.dbg)
Hex file	Select to generate an Intel HEX file (xxx.hex)
Report file	Select to generate a report file (xxx.rpt)
Error file	Select to generate an error file (xxx.err)
AVR Studio object file	Select to generate an AVR Studio object file (xxx.obj)
Size warning	Select to generate a warning when the code size exceeds the Flash ROM size.
Swap words	This option will swap the bytes of the object code words. Useful for some programmers. Should be disabled for most programmers. Don't use it with the internal supported programmers.
Optimize code	This options does additional optimization of the generated code. Since it takes more compile time it is an option.
Show internal variables	Internal variables are used. Most of them refer to a register. Like _TEMP1 = R24. This option shows these variables in the report.

Languages	English • Deutsch