INITFILESYSTEM/de

= (**COPIED FROM ENGLISH PAGE**) === Action

Initialize the file system

 

 

Syntax

bErrorCode = INITFILESYSTEM (bPartitionNumber)

 

 

Remarks

bErrorCode	(Byte) Error Result from Routine, Returns 0 if no Error
bPartitionNumber	(Byte) Partition number on the Flashcard Drive (normally 1)

 

Reads the Master boot record and the partition boot record (Sector) from the flash card and initializes the file system.

This function must be called before any other file-system function is used.

 

 

See also

OPEN , CLOSE, FLUSH , PRINT, LINE INPUT, LOC, LOF , EOF , FREEFILE , FILEATTR , SEEK , BSAVE , BLOAD , KILL ,DISKFREE , DISKSIZE , GET , PUT , FILEDATE , FILETIME , FILEDATETIME , DIR , FILELEN , WRITE , INPUT, AVR-DOS File System

 

 

ASM

Calls	_GetFileSystem
Input	r24: partitionnumber (1-based)
Output	r25: Errorcode	C-Flag: Set on Error

 

 

 

Partial Example

Dim bErrorCode as Byte
bErrorCode = InitFileSystem(1)
If bErrorCode > 0 then
 Print "Error: "; bErrorCode
Else
 Print "Filesystem successfully initialized"
End If

Languages	English • Deutsch