BASE64ENC/de

= (**COPIED FROM ENGLISH PAGE**) === Action

Converts a string into the Base-64 representation.

 

 

Syntax

Result = BASE64ENC( source)

 

 

Remarks

Result	A string variable that is assigned with the coded string.
Source	The source string that must be code with base-64.

 

Base-64 is not an encryption protocol. It sends data in 7-bit ASCII data format. MIME, web servers, and other Internet servers and clients use Base-64 coding.

 

The provided Base64Enc() function is an encoding function. You need it when you want to send attachments with POP3 for example.

The target string will use 1 additional byte for every 3 bytes.

So make sure the target string is dimensioned longer then the original string.

 

 

See also

CONFIG TCPIP , GETSOCKET , SOCKETCONNECT , SOCKETSTAT , TCPWRITE , TCPWRITESTR , CLOSESOCKET , SOCKETLISTEN , BASE64DEC

 

 

Example

$regfile = "m48def.dat" ' specify the used micro
$crystal = 8000000 ' used crystal frequency
$baud = 19200 ' use baud rate
$hwstack = 32 ' default use 32 for the hardware stack
$swstack = 10 ' default use 10 for the SW stack
$framesize = 40 ' default use 40 for the frame space
$lib "tcpip.lbx"
Config Com1 = Dummy , Synchrone = 0 , Parity = None , Stopbits = 1 , Databits = 8 , Clockpol = 0
 
 
Dim S As String * 15 , Z As String * 15
 
S = "bWFyazptYXJr"
Z = Base64dec(s)
Print Z 'mark:mark
s = Base64Enc(z)
Print s
End

Languages	English • Deutsch