$SERIALINPUT2LCD/de

= (**COPIED FROM ENGLISH PAGE**) === Action

This compiler directive will redirect all serial input to the LCD display instead of echo-ing to the serial port.

 

 

Syntax

$SERIALINPUT2LCD

 

 

Remarks

You can also write your own custom input or output driver with the $SERIALINPUT and $SERIALOUTPUT statements, but the $SERIALINPUT2LCD is handy when you use a LCD display. By adding only this directive, you can view all output form routines such as PRINT, PRINTBIN, on the LCD display.

 

 

See also

$SERIALINPUT , $SERIALOUTPUT , $SERIALINPUT1 , $SERIALOUTPUT1

 

 

Example

$regfile = "m48def.dat"
$crystal = 4000000
$baud = 19200
Config Com1 = Dummy , Synchrone = 0 , Parity = None , Stopbits = 1 , Databits = 8 , Clockpol = 0
 
Config Lcdpin = Pin , Db4 = Portb.4 , Db5 = Portb.5 , Db6 = Portb.6 , Db7 = Portb.7 , E = Portc.7 , Rs = Portc.6
 
$serialinput2lcd
Dim V As Byte
Do
Cls
Input "Number " , V 'this will go to the LCD display
Loop

Languages	English • Deutsch