Aus MCS Wiki AVR

Version vom 12. Dezember 2014, 12:02 Uhr von Admin (Diskussion | Beiträge)

(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Wechseln zu: Navigation, Suche

Inhaltsverzeichnis

Action

Appends a block of memory to the current display list memory address where the offset is specified in REG_CMD_DL.

CmdAppend Ptr, Num

Ptr	Start of source commands in main memory
Num	Number of bytes to copy. This must be a multiple of 4

After appending is done, the co-processor engine will increase the REG_CMD_DL by num to make sure the display list is in order.

' Pseudocode
CmdAppend 0, 40 ' Copy 10 commands from main memory address 0
Display_E ' finish the display list

Languages	English