$DEFAULT/de

= (**COPIED FROM ENGLISH PAGE**) === Action

Set the default for data types dimensioning to the specified type.

 

 

Syntax

$DEFAULT var

 

 

Remarks

Var	SRAM, XRAM, ERAM

 

Each variable that is dimensioned will be stored into SRAM, the internal memory of the chip. You can override it by specifying the data type.

Dim B As XRAM Byte , will store the data into external memory.

 

When you want all your variables to be stored in XRAM for example, you can use the statement : $DEFAULT XRAM

Each Dim statement will place the variable in XRAM in that case.

 

To switch back to the default behavior, use $END $DEFAULT

 

 

See also

NONE

 

 

ASM

NONE

 

 

Example

$regfile = "m48def.dat"
$crystal = 4000000
$baud = 19200
Config Com1 = Dummy , Synchrone = 0 , Parity = None , Stopbits = 1 , Databits = 8 , Clockpol = 0
 
 
$default Xram
Dim A As Byte , B As Byte , C As Byte
'a,b and c will be stored into XRAM
 
 
$default Sram
Dim D As Byte
'D will be stored in internal memory, SRAM

Languages	English • Deutsch